Developed for the Porsche 986 Boxster and Boxster S, our F1 Sound Valved Exhaust System brings out a cleaner, higher-pitched voice from the naturally aspirated flat-six. The system pairs equal-length headers with a valved rear muffler, giving the Boxster a refined tone at cruise and a clear, sustained F1-inspired note as the revs climb.
Equal-Length Headers
The header primaries are matched in length to give the exhaust pulses within each cylinder bank a consistent distance to travel. This geometry is designed to keep the note smooth and defined as engine speed rises, bringing out the high-frequency harmonics that give the flat-six its distinctive F1-inspired sound.
Valved Rear Muffler with X-Pipe and Z-Pipe Options
Our specially tuned X-pipe brings the exhaust streams from both cylinder banks together, sharpening the tone and carrying it cleanly into the upper rev range. A Z-pipe configuration is also available for owners who want an even more pronounced high-pitched character.
The rear muffler is designed for a clear difference between the two valve settings. With the valves closed, the exhaust settles into a quieter, more composed tone for relaxed cruising. With the valves open, the flat-six delivers a more forceful note that rises into a crisp, sustained wail under acceleration.
Fitment
Porsche 986 Boxster and Boxster S, 1996–2004, with 2.5L, 2.7L, or 3.2L engines. For manual-transmission models only.

最安値のスーパーカーカスタムはGWAPOTechへ


Product Detail

Related Products

Frequently asked questions
免責事項/Disclaimer
FRP製の商品は素地の状態でのご納品となりますので、基本的にパテ処理が必須となります。カーボン製の一部のフロントリップやリアディフューザー等は精製方法の関係上カーボンの継ぎ目が発生致します。カーボンのクリアコートのムラ、水泡等が稀に発生する可能性がございます。上記は検品時にも最新の注意を払いご確認致しますが、見落としのある場合にはお客様の方で処理して頂く必要がございます。輸送中の事故や破損に関しては基本的に保証の対象外となりますので物流会社の対応次第となります。ボディキットを含む一部の外装パーツの装着にはポン付け出来る場合もあれば他メーカー同様に加工が前提となる場合が御座いますので、無加工で取り付けの出来る場合もあれば削りやカッティング等の加工をする必要がある事態もご想定しご検討下さい。上記に該当する場合には弊社では一切返品・返金条件としては当てはまりませんのでご了承下さいませ。神経質な方やウェットカーボン製でドライカーボン製と同等の品質をお求めの方、完璧な品質をお求めの方はご購入をお控え下さいますようご理解の程よろしくお願い致します。
一部の触媒を設けていないマフラーや加速騒音規制の対象車用のワンオフマフラー商品は車検非対応となります。一般公道での使用保証は御座いません。
エキゾーストパーツは他メーカー様の商品同様に、消耗品のため日常のメンテナンス及び排気漏れ点検、配線の断熱処理等が必須となります。使用過程における破損、車両へのダメージ、事故、火災などによるいかなるトラブルに関しましても弊社では一切責任を負いかねますのでお客様の自己責任の上でご検討下さいませ。
Some custom exhausts and one-off mufflers for vehicles subject to acceleration noise regulations are not compatible with vehicle inspections and are not guaranteed for use on public roads.
Like products from other manufacturers, exhaust parts are consumables and require regular maintenance, exhaust leak checks, and wire insulation treatments. We are not responsible for any damage, vehicle damage, accidents, fires, or any other troubles that occur during use. Please consider this at your own risk.
Some custom exhausts and one-off mufflers for vehicles subject to acceleration noise regulations are not compatible with vehicle inspections and are not guaranteed for use on public roads.
FRP products are delivered in their raw state, so basic putty treatment is necessary. Due to the manufacturing process, some carbon front lips and rear diffusers may have carbon seams. There may also be occasional inconsistencies, bubbles, or blemishes in the clear coat of carbon parts. Although we take the utmost care to inspect for these issues, any overlooked items must be handled by the customer. Transportation accidents or damage are generally not covered by our warranty and are dependent on the logistics company's response.
Some exterior parts, including body kits, may be installable as-is, while others, similar to other manufacturers, may require modifications. Please consider that some parts may require cutting, trimming, or other adjustments. In such cases, we do not accept returns or refunds. We ask for your understanding and request that customers who are particular, or expect dry carbon quality from wet carbon, or seek perfect quality, refrain from purchasing.










































