Product Detail

Welcome to the GoatStrada cat-back exhaust system for the F87 M2C platform, or in other words, the solution to the S55 sound problem. For years enthusiasts have wanted to find a solution to the buzzy and raspy sound these cars produce from the factory. As the M2 Competition has the same problem as its big brother, we had to develop a solution for it. Our mission has been to find this hidden sound and allow all F87C owners to enjoy it. This full catback is comprised of a 2.75" equal length mid section with an H pipe configuration. After traveling through the H pipe the exhaust is combined into a 3.5-inch axle back. This combination helps smooth the exhaust tones to provide a very enjoyable sound through the entire rev range. When operating with the valves open, the exhaust gases exit unrestricted out of the passenger side exhaust tips. With the valves closed the exhaust passes through our quad chambered muffler and out of the drivers side exhaust tips for a lower volume experience, very well suited to daily driving and not alerting the Karens. This system mounts up to factory mounting points and is a direct bolt-on. It's time to make your M2 Competition sound like it always should have.

BMW M2C F87 Racing Valved Sport Exhaust system Stage 2

$2,050.00

MESSAGE US

Related Products

Welcome
to Our BLOG

日々のワンオフマフラー製作の裏側にある匠のサウンドへの拘りに密着したブログです。

免責事項/Disclaimer

FRP製の商品は素地の状態でのご納品となりますので、基本的にパテ処理が必須となります。カーボン製の一部のフロントリップやリアディフューザー等は精製方法の関係上カーボンの継ぎ目が発生致します。カーボンのクリアコートのムラ、水泡等が稀に発生する可能性がございます。上記は検品時にも最新の注意を払いご確認致しますが、見落としのある場合にはお客様の方で処理して頂く必要がございます。輸送中の事故や破損に関しては基本的に保証の対象外となりますので物流会社の対応次第となります。ボディキットを含む一部の外装パーツの装着にはポン付け出来る場合もあれば他メーカー同様に加工が前提となる場合が御座いますので、無加工で取り付けの出来る場合もあれば削りやカッティング等の加工をする必要がある事態もご想定しご検討下さい。上記に該当する場合には弊社では一切返品・返金条件としては当てはまりませんのでご了承下さいませ。神経質な方やウェットカーボン製でドライカーボン製と同等の品質をお求めの方、完璧な品質をお求めの方はご購入をお控え下さいますようご理解の程よろしくお願い致します。

一部の触媒を設けていないマフラーや加速騒音規制の対象車用のワンオフマフラー商品は車検非対応となります。一般公道での使用保証は御座いません。
エキゾーストパーツは他メーカー様の商品同様に、消耗品のため日常のメンテナンス及び排気漏れ点検、配線の断熱処理等が必須となります。使用過程における破損、車両へのダメージ、事故、火災などによるいかなるトラブルに関しましても弊社では一切責任を負いかねますのでお客様の自己責任の上でご検討下さいませ。

Some custom exhausts and one-off mufflers for vehicles subject to acceleration noise regulations are not compatible with vehicle inspections and are not guaranteed for use on public roads.

Like products from other manufacturers, exhaust parts are consumables and require regular maintenance, exhaust leak checks, and wire insulation treatments. We are not responsible for any damage, vehicle damage, accidents, fires, or any other troubles that occur during use. Please consider this at your own risk.

Some custom exhausts and one-off mufflers for vehicles subject to acceleration noise regulations are not compatible with vehicle inspections and are not guaranteed for use on public roads.

FRP products are delivered in their raw state, so basic putty treatment is necessary. Due to the manufacturing process, some carbon front lips and rear diffusers may have carbon seams. There may also be occasional inconsistencies, bubbles, or blemishes in the clear coat of carbon parts. Although we take the utmost care to inspect for these issues, any overlooked items must be handled by the customer. Transportation accidents or damage are generally not covered by our warranty and are dependent on the logistics company's response.

Some exterior parts, including body kits, may be installable as-is, while others, similar to other manufacturers, may require modifications. Please consider that some parts may require cutting, trimming, or other adjustments. In such cases, we do not accept returns or refunds. We ask for your understanding and request that customers who are particular, or expect dry carbon quality from wet carbon, or seek perfect quality, refrain from purchasing.